EIK

曲柄手柄 旋转手柄

ELESA原创设计

• Material
Glass-fibre reinforced polypropylene based (PP) technopolymer.
Resistant to solvents, oils, greases and other chemical agents.
• Colour
Black, matte finish.
• Boss cap
Acetal resin based technopolymer (POM), black colour, matte finish;
press-fit assembly, removable by pressing on the outer edge (ELESA
original design).
• Standard execution
Black-oxide steel boss, H9 hole with keyway in compliance with DIN
6885/1 tolerance P9 (see page ).
Revolving handle type IEL+x SOFT in technopolymer coated with "softtouch"
thermoplastic elastomer (TPE), black colour, matte finish, not
removable.
• Indexing plunger
Glass-fibre reinforced polyamide based (PA) technopolymer handle,
black colour, matte finish. Black-oxide steel plunger.
Glass-fibre reinforced polyamide based (PA) technopolymer handle,
black colour, matte finish. Black-oxide steel plunger. When the indexing
plunger is in the protruding position, the plunger itself seats in one of
the especially drilled holes on the wall, thus preventing the crank handle
to turn (fig. 1). When it is in the rest position, the plunger is retracted and
does not seat in the holes. The crank handle can rotate freely and it is
not blocked (fig. 2).
Special executions on request
Execution with locking device, see drawing.
EIK. crank handle can be supplied in other colours or customised with
marks, logo or special graphics (tampoprinting).