标准件 |
主尺寸 |
重量 |
||||
说明 |
d1 |
d2 |
d3 |
h1 |
h2 |
g |
20 |
17 |
1.8 |
3.2 |
1.2 |
3 |
|
25 |
21 |
2.2 |
3.2 |
1.2 |
5 |
|
30 |
24 |
3.2 |
3.2 |
1.2 |
7 |
|
40 |
34.5 |
3.2 |
3.2 |
1.2 |
12 |
|
50 |
43 |
3.2 |
3.2 |
1.2 |
19 |
Technical information
Stainless Steel NI
AISI 303
Information
Adjustement plates GN 2277.1 are used in combination with bull´s eye Levels GN 2277, Type A.
The mounting bore holes offset by 120° allow the bull´s eyes levels and the mounting plate to be aligned in relation to the mounting surface. An alignment ball
at the bottom surface of the adjustement plates serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is
located inside the marking ring once the horizontal alignment is reached
扫一扫 加关注