MBT-XX new
用于位置指示器的菱形切割滚花旋钮
ELESA 原创设计
|
Standard Elements |
Main dimensions |
Mounting hole |
Weight |
Handwheel/indicator combinations |
||||||||
|
代码 |
说明 |
D |
L |
d1 |
d2 |
f |
h1 |
l1 |
d H7 |
h |
g |
|
|
MBT.60-GXX1 A-8 |
58 |
52.5 |
24 |
18 |
M5 |
6 |
17 |
8 |
17 |
72 |
GA01 - GA11 |
|
|
MBT.80-GXX2 A-10 |
77 |
61 |
28 |
22 |
M5 |
6 |
22 |
10 |
22 |
130 |
GA02 - GA12 - GW12 |
|
|
Standard Elements |
Main dimensions |
Mounting hole |
Weight |
Handwheel/indicator combinations |
||||||||||||
|
代码 |
说明 |
D |
L |
d1 |
d5 |
f |
f1 |
h1 |
l1 |
l2 |
l4 |
R |
dh7 |
h |
g |
|
|
MBT.60-PXX1 A-8 |
58 |
55 |
18 |
6 |
M5 |
M4 |
5 |
18.5 |
10.5 |
14.5 |
19 |
8 |
20.5 |
87 |
PA01 - PA11 |
|
|
MBT.80-PXX2 A-10 |
77 |
59 |
30 |
6 |
M5 |
M4 |
6 |
20 |
12 |
13 |
28.5 |
10 |
22 |
218 |
PA02 - PA12 - PW12 |
|
Technical information
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Black, matte finish.
Black-oxide steel boss, H7 reamed hole, fitting to shaft by means of a supplied grub screw with hexagon socket and cup end UNI 5929-85.
- MBT-GXX: for gravity indicators.
- MBT-PXX: for positive drive indicators.
Rear flange with internal crown gear wheel in acetal resin based (POM) technopolymer. Black-oxide steel screw and anchor pin.
Cover type CP-XX for fitting instead of the indicator.
The particular truncated diamond knurl on the outside rim of the knob allows a safe and comfortable grip. It gives the operator
the possibility of manoeuvring in a sensitive and ergonomic way and of taking the knob back again during the process of quick
rotation (or of screwing) without the need of adjustments by the hand and the wrist.
To choose the indicator see the table below for possible assembly with indicators. See also "Assembly instructions" for gravity i
ndicators type G or positive indicators type P
扫一扫 加关注
