PR-CH
平头拉式手柄 （咬接式安装）
ELESA 原创设计
|
Standard Elements |
F 1 |
F 2 |
Weight |
|
|
代码 |
说明 |
[N] |
[N] |
g |
|
PR.92-CH-D-K-F |
3600 |
1500 |
57 |
|
|
PR.92-CH-D-K-U |
3600 |
1500 |
57 |
|
|
PR.92-CH-D-K-M |
3600 |
1500 |
57 |
|
|
PR.92-CH-D-QE-T |
3600 |
1500 |
40 |
|
|
PR.92-CH-D-QE-Q |
3600 |
1500 |
40 |
|
|
PR.92-CH-S-K-F |
3600 |
1500 |
57 |
|
|
PR.92-CH-S-K-U |
3600 |
1500 |
57 |
|
|
PR.92-CH-S-K-M |
3600 |
1500 |
57 |
|
|
PR.92-CH-S-QE-T |
3600 |
1500 |
40 |
|
|
PR.92-CH-S-QE-Q |
3600 |
1500 |
40 |
|
Technical information
Handle and stator
Glass-fibre reinforced polyamide based (PA) technopolymer.
Resistant to solvents, oils, greases and other chemical agents.
Grey-black colour, matte finish.
Standard executions
Technical data
The lifting (F1) and pull out (F2) resistance values reported in the table are the result of tests carried out in laboratory with
handles assembled on metal sheet panels with thickness = 1.5 mm.
Assembly instructions
1) Drill the handle housing according to the template dimensions reported in the table.
2) Remove all drilling burrs before fitting the handle.
3) Fit the upper part of the handle into the housing (Fig. 1).
4) Press onto the lower part until the handle is completely snapped in (Fig. 2).
Accessories on request (to be ordered separately)
LPR closing lever.
扫一扫 加关注
